Fiber Metal Cutter Pestaña

0:00 Introduction
0:45 Parts and Accessories Description
2:20 Laser Machine overview and description
4:00 Chiller - Electrical connection
4:20 Chiller - Water hoses connection
5:02 Chiller - Drain valve

0:00 Chiller - Turning on
0:25 Chiller - Setting up temperature
1:17 Chiller - Filter clean up
1:40 Air Compressor - Installation
2:01 Air Compressor - Filter clean up
2:15 Laser Tube - Description
2:50 Laser Tube - Installation
3:23 Laser Tube - Securing it on place
3:35 Laser Tube - Water connections
4:15 Laser Tube - Electrical connection
5:10 Releasing Rails before tuning machine on

0:00 Turning machine ON
0:54 Laser Tube Calibration
3:42 Alignment - First mirror

0:00 Alignment - First mirror (continued)
0:52 Alignment - Second mirror
2:19 Alignment - Third mirror
3:57 Blower Installation
4:47 Workable Materials and samples

0:00 Mirrors - Cleaning/Replacement
1:19 Lens - Cleaning/Replacement
4:44 Rail Lubrication
5:24 Laser Power Supply - replacement
6:59 Laser Machine - Electronic components

How to replace the water pump in your chiller

Comments from the DeNiro Guy about a CAMFive machine ;)

Removing the brackets from laser tube
Removing the water connection hoses
How to disconect power wires from tube
Removing the Laser Tube
------------------
Installing the new Tube
Conecting the water hoses
Wires Conection (ground and power)
Brackets to hold the tube
Turning the chiller ON
Eliminating bubles inside the tube

0:35 Installing Smartcarve
2:20 Selecting 1st controller
2:43 Installing Drivers (for 1st Controller)
3:50 Input and Fill text (by right clicking)
4:48 Adding a rectangle/square to cut
4:56 Layers: change layers (right click), Order [priority] of the cuts (double click)
5:40 Point of Origin, zoom in, and parameters
7:15 Clone for mass production
7:50 Sending to the machine (Carve out) for 1st controller only
8:35 Saving files (with all settings and drawings)
9:02 Export file: OUX laser machine native format in 1st controller
9:45 Importing files, resizing objects
11:00 Tips when cutting: (lead in/out, create arrays)
14:00 Exporting files from CorelDraw and import in Smartcarve
Engraving files:
16:00 Scatter Group (after importing), fill vector files
19:51 Acceptable vector format files
20:35 Engraving Biptmap files
25:30 Engraving with the Rotary Device